Dual-Frequency RFID Temperature Monitoring & Logging Label | 90×125 mm
The dual-frequency RFID temperature monitoring and logging label is designed for seamless cold chain management, ideal for vaccines, pharmaceuticals, fresh cold chains, and smart parcel tracking. The label features an integrated battery, allowing for offline, continuous reading and automatic generation of statistical reports. Equipped with both NFC and UHF capabilities, the label ensures efficient inventory management, precise temperature monitoring, and product safety throughout the cold chain, while fully complying with ISO/IEC 14443-A, EPC Class 1 Gen 2, and ISO/IEC 18000-6C standards.
The label features a sensor IC with three interfaces: a contact-based I2C interface, an HF NFC port, and a UHF port. The NFC port allows data reading via NFC-enabled Android or iOS smartphones, while the UHF port supports long-range, high-density reading with a UHF reader. It operates in semi-active mode (battery-powered) or passive mode (powered by the reader’s RF field), with temperature measurements possible in both modes and at both operating frequencies.
Material: Matte Iaminated PP synthetic paper Label Size: 90×125 mm Antenna Size: 68×80 mm
Technical Parameters
Operating Frequency:UHF 860-960 MHz;HF 13.56 Communication Protocol: UHF:ISO/IEC 18000-6C, EPC Class 1 Gen 2 | HF: ISO/IEC 14443-A,NFC Forum Type 2 Temperature Measurement Sensitivity: -25 dBm(UHF) Resonant Capacitance: 23.5 pF(HF) Battery Information: 1.5 V/10 mAh Precise Temperature Measurement Range: -35°C~50°C Temperature Sensor: Semiconductor temperature sensor & ADC RTC(Powered by the battery): Low power RC oscillator & low power digital counter & timer RTC Accuracy: ±2%@-20°C~50°C RTC Measurement Interval: 1~65535 s Multi-Mode Logging: Normal mode & limit mode Operating Mode: Semi-active mode powered by the battery or Passive mode powered by a RF field of a reader Battery Life: Under a duty cycle of 1-hour operation with temperature logging every 5 minuter, supports approximately 50 operating cycles(typical).Affected by ambient temperature, read frequency, and usage profile.
Chip Characteristics
Data Retention: 10 years User Memory: 0-8k bits(Configurable area size) TID Memory(Unchangeable): 96 bits(UHF) UID Memory(Unchangeable): 7 bytes(HF) EPC Memory: 160k bits Kill & Access Password: 32 bits Write Endurance: 200,000 times Temperature Data is Stored in NDEF Format: -19.5 dBm Real-time of Scheduled(logging)Environmental Temperature Measurement and Recording: -16.7 dBm Temperature Logging/Measurement: Support Temperature Logging/Measurement Interval is Configurable: Support
Additional Information
Operating Environment: -35°C ~ 50°C Storage Environment: 18°C ~ 28°C, 40% ~ 60% RH Handling Precautions: 1. Do not bend. 2. Keep away from water and collision. 3. Inlays with black-dot marks are bad ones, do not use.
Packaging
Packing Format: Stacked in folds, packed in box Packing Quantity: 100 pcs/box, per box 0.63 kg
Operation Demonstration
Label Testing
Loooking for More Products? search or use the categories
As a leading RFID hardware manufacturer for over a decade, we are committed to delivering unparalleled quality at competitive prices. Our advanced production facilities and stringent quality control ensure that every product meets the highest standards.
EXPERTISE & INNOVATION
Our expert team drives innovation in RFID technology. Whether you need custom solutions or cutting-edge products, we provide advanced and effective RFID solutions tailored to your needs.
EFFICIENT & RELIABILITY
We offer reliable global shipping with in-stock items delivered within 1-3 business days in North America, Europe, and the Asia Pacific. Our proven track record ensures your satisfaction every time.
Dual-Frequency RFID Temperature Monitoring & Logging Label | 90×125 mm
The dual-frequency RFID temperature monitoring and logging label is designed for seamless cold chain management, ideal for vaccines, pharmaceuticals, fresh cold chains, and smart parcel tracking. The label features an integrated battery, allowing for offline, continuous reading and automatic generation of statistical reports. Equipped with both NFC and UHF capabilities, the label ensures efficient inventory management, precise temperature monitoring, and product safety throughout the cold chain, while fully complying with ISO/IEC 14443-A, EPC Class 1 Gen 2, and ISO/IEC 18000-6C standards.
The label features a sensor IC with three interfaces: a contact-based I2C interface, an HF NFC port, and a UHF port. The NFC port allows data reading via NFC-enabled Android or iOS smartphones, while the UHF port supports long-range, high-density reading with a UHF reader. It operates in semi-active mode (battery-powered) or passive mode (powered by the reader’s RF field), with temperature measurements possible in both modes and at both operating frequencies.
Contact sales
Description
Features
Frequency Band
HF 13.56 MHz, UHF 860-960 MHz
International Standard
HF:ISO/IEC 14443-A, NFC Forum Type 2; UHF: ISO/IEC 18000-6C, EPC Class 1 Gen 2
EPC Memory
160k bits
UID Memory
7 bytes(HF)
User Memory
0-8k bits(Configurable area size)
TID Memory
96 bits(UHF)
Specifications
Physical Specifications
Material: Matte Iaminated PP synthetic paper
Label Size: 90×125 mm
Antenna Size: 68×80 mm
Technical Parameters
Operating Frequency: UHF 860-960 MHz;HF 13.56
Communication Protocol:
UHF:ISO/IEC 18000-6C, EPC Class 1 Gen 2 | HF: ISO/IEC 14443-A, NFC Forum Type 2
Temperature Measurement Sensitivity: -25 dBm(UHF)
Resonant Capacitance: 23.5 pF(HF)
Battery Information: 1.5 V/10 mAh
Precise Temperature Measurement Range: -35°C~50°C
Temperature Sensor: Semiconductor temperature sensor & ADC
RTC(Powered by the battery): Low power RC oscillator & low power digital counter & timer
RTC Accuracy: ±2%@-20°C~50°C
RTC Measurement Interval: 1~65535 s
Multi-Mode Logging: Normal mode & limit mode
Operating Mode: Semi-active mode powered by the battery or Passive mode powered by a RF field of a reader
Battery Life: Under a duty cycle of 1-hour operation with temperature logging every 5 minuter, supports approximately 50 operating cycles(typical).Affected by ambient temperature, read frequency, and usage profile.
Chip Characteristics
Data Retention: 10 years
User Memory: 0-8k bits(Configurable area size)
TID Memory(Unchangeable): 96 bits(UHF)
UID Memory(Unchangeable): 7 bytes(HF)
EPC Memory: 160k bits
Kill & Access Password: 32 bits
Write Endurance: 200,000 times
Temperature Data is Stored in NDEF Format: -19.5 dBm
Real-time of Scheduled(logging)Environmental Temperature Measurement and Recording: -16.7 dBm
Temperature Logging/Measurement: Support
Temperature Logging/Measurement Interval is Configurable: Support
Additional Information
Operating Environment:
-35°C ~ 50°C
Storage Environment:
18°C ~ 28°C, 40% ~ 60% RH
Handling Precautions:
1. Do not bend.
2. Keep away from water and collision.
3. Inlays with black-dot marks are bad ones, do not use.
Packaging
Packing Format: Stacked in folds, packed in box
Packing Quantity: 100 pcs/box, per box 0.63 kg
Operation Demonstration
Label Testing
Loooking for More Products? search or use the categories
Why Choose us
QUALITY & VALUE
As a leading RFID hardware manufacturer for over a decade, we are committed to delivering unparalleled quality at competitive prices. Our advanced production facilities and stringent quality control ensure that every product meets the highest standards.
EXPERTISE & INNOVATION
Our expert team drives innovation in RFID technology. Whether you need custom solutions or cutting-edge products, we provide advanced and effective RFID solutions tailored to your needs.
EFFICIENT & RELIABILITY
We offer reliable global shipping with in-stock items delivered within 1-3 business days in North America, Europe, and the Asia Pacific. Our proven track record ensures your satisfaction every time.
Ask How We can Help
RFID Readers to Match ISO 18000-6C Compliant
Overhead UHF RFID Reader with Sound and Light Alarm | ISO18000-6B/C
UHF RFID Gate Reader with Light & Sound Alarm
UHF RFID Ceiling-Mount Reader with Light & Sound Alarm
Integrated UHF RFID Reader
UHF Desktop RFID Reader / Writer AZD-R1
UHF RFID 4-Port | 8-Port Reader AZF-M1
UHF RFID Handheld Reader AZ-R2
Wearable Bluetooth UHF RFID Reader AZ-MR20
UHF RFID Handheld Reader AZH-P1